Manual Carton Closing Stapler, 1-3/8-Inch Crown, 3/4-Inch Length Carton Staples, Box Stapler with 100 Pcs Staples Carton Stapler Corrugated Carton Staple Gun for Closing Cartons

DescriptionThe carton stapler is made of high-quality iron, aluminum, and steel, so it is strong and durable. It can contain 50 staples for one time and the ergonomic handle allows for easy operation. Meanwhile, the small size and light weight make it convenient for storage and carry. It is your ideal tool.DetailsRound Corners: The round corners can prevent scratching your hands.Ergonomic Handle: The ergonomic long handle allows you to use this product for a long time without hand soreness. Meanwhile, the rubber sleeve with non-slip patterns can play a good non-slip effect to ensure the safety of use.Staples Puller&Pusher: When you nail the staple in the wrong position, you can use this small puller to pry it open. And the staples pusher with a new structure is easy to operate and has good stapling effect.ApplicationIt is suitable for all kinds of sealed boxes, cartons, closed corrugated cardboard, etc.SpecificationColor: Yellow, BlackMaterial: Iron, Aluminum, Rubber, SteelStyle: ModernSurface Treatment: Quenching ProcessNumber of Staples: 100Capacity: 50pcsOperation Mode: ManualFeature: AdjustableGross Weight: 2.75kg/6lbsPackage Size: 42.5*14.8*12.5cm/16*5*4inchProduct Size: 30.5*8*26.7cm/12*3.15*10.5inchStaples Crown: 34.7mm/(1-3/8inch)Staples Leg Length: 18mm(3/4inch)Staples Width: 2.3mm/(0.091inch)How to Install Staples1. Pull the staples pusher to the end.2. Put the staples into the slot.3. Place the staples shaft.4. Press and hold the rear fixed shrapnel to push forward.5. Fix the shrapnel.6. The installation is complete.Package Included1* Carton Stapler1* Staples Pusher1* Staples Puller100* Staples1* Chinese ManualAll Accessories for AssemblyNotes1. Please select the staples specification correctly to avoid jamming and other damages to the tool.2. When the tool is stopped or repaired, be sure to take out the remaining staples in the clip.3. The machine can only be used for plane sealing, not for three-dimensional sealing and side sealing. Due to the working principle, there will be small holes on both sides of the sealing points.4. During operation, the sealing surface of the carton should be stabilized, and the machine should be close to the carton surface, otherwise it is easy to appear invalid operation.5. This product doesn't include fasteners in the package. Please prepare it in advance if needed.6. Please read the manual completely before use, and pay particular attention to the safety instructions included.7. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.

• Large Capacity: It can contain 50 staples for one time, which can avoid frequent adding staples and support continuous work.
• Easy Operation: It does not need air supply and can be simply operated by pressing the handle. Even novices can get started easily.
• Adjustable Design: You can turn the adjusting bolt clockwise/counterclockwise to make the clip loose/tight. Besides, the adjusting rod can be lifted and swung left and right to adjust the penetration depth (D: deep S: shallow), making it suitable for different carton thickness.
• Highly Portable: It is lightweight and compact (12*3.15*10.5inch), allowing you to easily store and carry it.
• Easy to Clean: The small size and simple structure make it easy for you to clean it with a wet towel.